JioDongle.Local.Html: Learn How to Configure JioFi Dongle Properly

Read this page to learn how you can correctly configure your jiofi dongle or jiofi router at jiofidongle.local.html. JIOFI or JIO Dongle is a low-cost 4G device with a lot of facilities. This device provides high-speed data capacity and longer battery life, and it gives lots of free offers to the users. JIO supports only 4G network, and till now it will not gives the 3G signal. JIOFI 2 is a Hotspot Dongle it connects up to 10 Wifi Wifi devices to share the internet data. This hotspot dongle works with JIO sim only.

This JIOFI Hotspot device also comes with a free data sim and the Hotspot Dongle device will be available on Digital Express and also on e-commerce websites. After getting the JIO Hotspot, remove the battery of the device and note down the default SSID and Wifi password of the JIOFI device. Once you noted the details, reinsert the battery and close the back panel and get ready for the setup process.


How to Login to JioFi Dongle

STEP1: Switch On the Wifi device and go to the Pc/Laptop and view the available connections in the list. Now select your device by SSID and enter the password of the device which you noted already After that click on connect to get connected.

STEP2: Go to the browser and enter the URL, http://jiofi.local.html or; Press enter to get setup page.

If you are using a JioFi Dongle then you have to enter the URL: http://jiofidongle.local.html.

STEP3: Now on the right top of the page, you will see the login button. Enter the default username and default password which you noted already from the back of the device and Click Login.

Default Username: administrator
Default Password: administrator

You can change this default details once you login.

How to Enable MAC Address Filtering on JioFi Dongle

After login into the http://jiofi.local.html or jiofidongle.local.html web page to enable the MAC address. Click on the setting in the menu at the top. Select network in the left menu. Now enable the MAC address filter. Now select allow to allow the MAC address filter mode. To add the MAC address click on add button. Click Apply.

Change some other settings

  • Change the Wifi settings of your device
  • Modify the security password for network broadcasting.
  • Change your default SSID name as your wish.
  • Select the security types like WPA2-PSK, WPA, Open.
  • Change encryption type and channel mode.
  • Finally, click on Apply to change the settings of your device and also use the changed details to access the device.

In this step, we are going to access the storage card in JIOFi device. To apply for the SD card first open the back panel of the device and remove the battery then insert your SD card into the given slot and reinsert your battery and then close the panel.

To enable the storage account, follow the steps further.

  1. In the menu click on the setting link and then click on Storage link on the left.
  2. Now, by clicking the enable and disable option either to access the storage account.
  3. Enter the storage username and password.
  4. Click on Apply to update the details.
  5. Enter the URL, http://jiofi.local.html/sd-login.html in your browser to access the SD card files.
  6. Type the username and password to log in.
  7. Use the files on the SD card, and you can even upload the new files on the SD card.

User Management can be done using the User Management page in settings. Here you can change user details and also the Wifi settings menu in the settings menu. All the above procedures are important for all the JIOFI devices. If you don’t remember the login details. Click the reset button for about 30 seconds by powering on the device, this will reset your device. The reset button will be available in your backside of your device.

  • Was this Helpful ?
  • YesNo

Leave a Reply

Your email address will not be published. Required fields are marked *